WF4 - CMM - DMIS version - SCANNING

Discussion in 'Pro/Engineer & Creo Elements/Pro' started by Pier Dil, Jul 5, 2008.

  1. Pier Dil

    Pier Dil Guest

    Hi people,
    I'd like to know which version of DMIS Standard is now supported in WF4
    CMM application
    In WF3 DMIS 3.0 was supported.
    Today DMIS reached the 5.1 version.

    IN WF4 it's possible to drive a scanning movements. Anybody has
    experience with Zeiss Machines?

    THANKS A LOT
    Bye
    Pier
     
    Pier Dil, Jul 5, 2008
    #1
  2. Pier Dil

    Janes Guest

    Don't know anything technical on this subject so I checked the Pro/e KB. The last reference they have to any version was 3.0 in TPI 123099. What it said there was meant to quash rumors that they'd extensively support DMIS commands. Not very hopeful with respect to supporting MORE capable DMIS standards. PTC also has a negative incentive in the extra support commitment they incur if they support a later rev.

    For more general questions, I'd try these guys, seems like a lively bunch:
    http://www.pcdmisforum.com/

    David Janes
     
    Janes, Jul 5, 2008
    #2
  3. Pier Dil

    Pier Dil Guest

    Janes ha scritto:
    Thank you so much anyway !
    Bye
     
    Pier Dil, Jul 6, 2008
    #3
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. How to import a CMM scanned contour and extrude it, please?

  2. need help finding tutorials for Pro/nc and pro/cmm

  3. Pro/CMM

  4. PRO/CMM and Shaded Probe

  5. WF4 Installation problem

  6. Underlay in wf4

  7. WF4

  8. assembly family table( pro e wf4)

Loading...