VXL - Changing nets on pins of components not placed with XL

Discussion in 'Cadence' started by Tim, Oct 27, 2006.

  1. Tim

    Tim Guest

    In some of my layouts, that are placed with VXL, I place cells by hand
    which have pins for connectivity. These cells do not matchup to any
    components in the schematic. The pins on these cells retain the net
    name of the first net that is attached to them so if the net name is
    changed through an ECO the pin doesn't get updated during the "Update
    components and Nets" and will continuosly get an error marker placed on
    it. Is there a way to update the net names attached to the pins of
    these cells?

    Thanks in Advance,
    Tim
     
    Tim, Oct 27, 2006
    #1
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. layoutXL update components and nets

  2. VXL - show incomplete nets - leaves a traceback!

  3. Matching components and nets with VXL

  4. Update components and nets Layout XL

  5. VXL: Roughly how many nets/devices can it handle (IC 5141)?

  6. Permute pins -VXL 5141

  7. VXL shows incomplete nets : how to add connectivity to shapes

  8. Getting Components and then getting mass properties info from those components sequentially

Loading...