Using analogLib port as a differential input instead of balun

Discussion in 'Cadence' started by Arik Zafrany, Jun 2, 2010.

  1. Arik Zafrany

    Arik Zafrany Guest

    Hi,

    Is there equaivalent model for the analogLib port for differential
    circuits?
    is the R splitted between the negative and positive terminals and the
    voltage source is divided by two?

    I see sometimes that people simulate a differential block (say LNA)
    with port of 100 [ohm].
    Is that mean that this is another way to simulate differential circuit
    instead of port+balun? is there any difference?

    Regards,
     
    Arik Zafrany, Jun 2, 2010
    #1
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. input-referred port noise

  2. Any experience with the sp1tswitch from analogLib?

  3. how to make Balun in cadence?

  4. analogLib problem when using spectreVerilog simulator

  5. analogLib problem

  6. set the parameters of the fourier component from analogLib

  7. delay analoglib ams setup

  8. Sketching/linework using Solidworks instead of Adobe Illustrator

Loading...