Using a licence over subnets

Discussion in 'AutoCAD' started by rufty_tufty_hoolythug, Dec 13, 2009.

  1. rufty_tufty_hoolythug

    rufty_tufty_hoolythug Guest

    I have a licence server for Autocad 2010 which I assumed was working
    fine. This was until I installed it on a machine on another subnet.
    Any machine on the other subnet will not see the licence server, even
    if I put the licence server's IP address in when it asks for the
    Licence Server.
    The server has an IP of 130.209.26.xxx and any machine that has an IP
    that starts the same works fine. Machines with an IP of 172.20.26.xxx
    will not see the licence on the licence server, although it will run
    the deployment with no problem. Any ideas of what I can do anyone?
     
    rufty_tufty_hoolythug, Dec 13, 2009
    #1
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. to run parametric simulation over different corners using analog artist

  2. Definition of nets and subnets

  3. Rebuilding... Over & over &over &over...

  4. It Ain't Over Till It's Over

  5. Check your voicemail over the internet using your own PC

  6. Sharing Licenses using ADLM over T1 question..

  7. Using ADLM over our T1

  8. Changed network card on Licence server and now clients can't get a licence

Loading...