TSPICE or HSPICE, tanner2virtuso

Discussion in 'Cadence' started by boki, Sep 10, 2003.

  1. boki

    boki Guest

    Hi, All:

    1. TSPICE or HSPICE?
    2. Can I use Tanner to layout my circuit than converts it as GDS for virtuso?


    Thanks a lot.
    Boki.
     
    boki, Sep 10, 2003
    #1
  2. boki

    Kholdoun TORKI Guest

    1. I will avoid answering to this question.
    Why not Spectre ?

    2. Yes. And also from Virtuoso to Tanner/L-Edit.
    Those 2 editors are compliant to the GDSII standard.

    The only thing that I have experienced, is the instancing
    with non-manhattan rotations which are not supported in Virtuoso,
    streamIn, and StreamOut.
    They are fully supported in Tanner/L-Edit and compliant to the
    GDS standard.
    The only solution I found to this problem, is to flatten those
    instances in L-Edit and export the GDS to be in Virtuoso.

    ================================================================
    Kholdoun TORKI
    http://cmp.imag.fr
    ================================================================
     
    Kholdoun TORKI, Sep 10, 2003
    #2
  3. boki

    eda support guy Guest

    Kholdoun,
    I m curious where you found non-manhattan rotations. A logo that was
    laid out with hierarchy ?
     
    eda support guy, Sep 10, 2003
    #3
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. IC4.4.6 on solaris(sparc version)with hspice

  2. HSpice 2002, Affirma, MIxed-Mode

  3. What is the potential difference between HSPICE and Spectre ?

  4. hspice parameters in spectre file

  5. programming in analysis of hspice simulation

  6. spectre vs hspice : different simulation results

  7. hspice level 3-->kappa=0 == spectre?

Loading...