The error of ATPG simulation

Status
Not open for further replies.

yuky

Usenet Archive
Joined
Jan 7, 2002
Messages
3
Reaction score
0
Hi,
I use the ncverilog to run ATPG pattern simulation. If I did not annotate the SDF during the simulation, then test is pass. But if I annotated the SDF during the simulation, then the simulator (ncverilog) will generate the following error:
ncsim: *internal* (sv_seghandler - trapno -1).
Then exit the simulation.

Who has ever met this problem? And how should I do next?

Thank you

yuky
t2-design.com
 
I use the ncverilog to run ATPG pattern simulation. If I did not annotate the SDF during the simulation, then test is pass. But if I annotated the SDF during the simulation, then the simulator (ncverilog) will generate the following error:
ncsim: *internal* (sv_seghandler - trapno -1).
Then exit the simulation.

Who has ever met this problem? And how should I do next?

This happened to us a lot.
When we used the SDF-options "+multisource_int_delays" and "+transport_int_delays", we would get the error you describe. Actually, I think the simulation doesn't even reach ncsim, it crashes out sometime during the ncelab stage (we start all or sims with the 'ncverilog' command- line...we don't manually launch ncelab, ncvlog, ncsim, etc.)

Once we removed those options, ncverilog would succesfully run our simulations. (Of course, we ran into other problems, like incorrect simulation of flipflops which had negative-latching time.)
 
Status
Not open for further replies.

Latest threads

Back
Top