slide image

how to make slide image alter i select the drawing
and than the slide will be appear at dialog box...
in image tile...

 

Somewhat complicated. Make the slide and store in a special folder. In
menu (acad.mnu) go to **IMAGE and insert as example below:

**WELDS
[WELDS]
[fillns,Fillet Near Side]^C^C-insert *fillns

Explanation: in square brackets "fillns," means the name of the slide
"Fillet Near Side" means note of what the slide represents
^c^c stops any command presently ongoing
-insert means to insert the drawing represented by the slide in the
image tile
*fillns means explode on insertion my drawing of fillet weld near side

Of course, the names "WELDS" is for my particular slide image library
which appears in my pulldown menu as pop12 - substitute name you want.

Hope this helps

 

Further to my previous, the example I gave you goes BELOW the **IMAGE
section of your acad.mnu. If you wish, send me your drawing via email
attachment as zip file and your acad.mnu if it is 2000i or 2002 or if you
already have customized it. I have 2000 and 2004 so, if you haven't
customized your menu and it is 2000 or 2004 I can make one slide for you and
modify your menu and then return the slide, menu and dwg. Once you have at
least one image tile made and the menu has been customized, you can add as
you go.

 

actually what i mean how the routine lisp look like example