Sketch Fillet tool ...... Is it just Me?

Discussion in 'SolidWorks' started by alphawave, Aug 30, 2007.

  1. alphawave

    alphawave Guest

    I've just been using 2007 SP3.1 as usual - just sketching away, then,
    I needed to add some fillets, I've not noticed it before but when I
    double clicked on the Sketch Fillet icon it did not stay locked on.

    I can add a fillet to a corner but the tool de-selects and I have to
    re-select it to add another fillet, I'm sure it used to stay locked

    The Sketch Chamfer tool operates as normal - click once it lets you
    chamfer a corner, then it de- selects
    - double click and you can keep chamfering corners until you have done
    - without having to re- select.

    Is it some thing I've selected or de-selected in error - or is my
    installation FUBAR

    Anyone know a quick fix without re-installing or moving to SP4?


    alphawave, Aug 30, 2007
  2. When you click on the toolbar button, look at the PM box. Make sure the Pin
    is activated. Then it should work just fine.

    Wayne Tiffany, Aug 30, 2007
  3. alphawave

    alphawave Guest

    Thanks Wayne,

    I didn't even give the Pin thing a thought!

    alphawave, Aug 31, 2007
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.