Showing hidden lines

Discussion in 'SolidWorks' started by Nathan Feculak, Feb 24, 2004.

  1. Nathan Feculak

    Nathan Feculak Guest

    I have a shaft with splines in an assembly and I am having problems showing
    the splines. All I want to shaow is the top and bottom spline all the rest I
    want to hide. but the splines need to be shown as hidden lines.
    The shaft is shown in a section view in an assembly but the shaft is not
    sectioned (Section Scope method) the view of the shaft is hidden lines
    removed. Can I change the shaft to Hidden Lines Visable and Hide the ones I
    don't want? I tried this but I can't change the shaft to Hidden Lines
    Visable, am I doing something wrong? Is there another way to do this. I
    tried showing hidden lines then hid the not needed lines but that did seem
    to work.

    Thanks Nathan
     
    Nathan Feculak, Feb 24, 2004
    #1
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Hide only some hidden lines in drawing

  2. drawings in WF:hidden lines

  3. 'Parting Lines' showing up in certain materials rendered in SW2004/PW2

  4. Hidden lines removed still show cosmetic threads

  5. Display problem - hidden lines showing through front faces

  6. Hidden Lines in Drawings

  7. Hidden lines and edge linesshowing as dark solid lines in assembly

Loading...