Red Dims

Discussion in 'SolidWorks' started by Oneball, Jul 31, 2008.

  1. Oneball

    Oneball Guest

    some dimensions on my drawings are displayed in red. anyone know
    why. They are not dangling. It has nothing to do with my color
    settings.
     
    Oneball, Jul 31, 2008
    #1
  2. Oneball

    j Guest

    Red dimensions are the default color for an overdefined dimension. If
    you RMB on one of them and change it to DRIVEN the color should change
    to black.
     
    j, Jul 31, 2008
    #2
  3. Oneball

    Oneball Guest

    Someone in my office was able to help me. On the line format tool bar
    i had to toggle the color display mode.
     
    Oneball, Jul 31, 2008
    #3
  4. Oneball

    Wayne Tiffany Guest

    Here we have our templates set up with a Dim layer set as the default and
    red color. That way the geometry is black and the dims and annotations that
    you put on are red. It's easier to work with because of the difference in
    color.

    WT
     
    Wayne Tiffany, Jul 31, 2008
    #4
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Adding a preset unit to DIMS

  2. dims & background mask..

  3. dims and ZOOM Extents

  4. Associative Dims in Lisp

  5. Select red and move red?????

  6. HP1055CM prints Photographs with too much red.

  7. red cross in the status column

  8. spin center - red black blue

Loading...