question about BOM balloon setting

Status
Not open for further replies.

Latif TASTAN

Usenet Archive
Joined
Feb 16, 2001
Messages
14
Reaction score
0
is there anybody who knows how to BOM balloon setting is done in a drawinf setup file? in an assembly drawing when putting balloons automaticly, all arrows catch the parts from their edges, but i want that arrows to catch the parts from its surface... is there any way to do this setting in a drawing setup file?

thanks in advance
-Latif-
 
To my knowledge, Pro/E doesn't have any type of configuration or drawing setup file option to support the type of behavior that you desire. That would be nice.

Regards,

Ron Marion

Latif Tastan wrote:
is there anybody who knows how to BOM balloon setting is done in a drawinf setup file? in an assembly drawing when putting balloons automaticly, all arrows catch the parts from their edges, but i want that arrows to catch the parts from its surface... is there any way to do this setting in a drawing setup file?

thanks in advance
-Latif-
 
its slow, but set up a map key to modify the attachment.

"Latif Tastan" wrote:

I think this is a defective side of Pro/E,
after putting BOM ballons automaticly, very hard to arrange them by
manual
Ron Marion wrote:

> To my knowledge, Pro/E doesn't have any type of configuration or drawing
> setup file option to support the type of behavior that you desire. That
> would be nice.
>
> Regards,
>
> Ron Marion
>
> Latif Tastan wrote:
> >
...
 
I think this is a defective side of Pro/E,
after putting BOM ballons automaticly, very hard to arrange them by manual

Ron Marion wrote:

To my knowledge, Pro/E doesn't have any type of configuration or drawing setup file option to support the type of behavior that you desire. That would be nice.

Regards,

Ron Marion

Latif Tastan wrote:
>
>is there anybody who knows how to BOM balloon setting is done in a
>drawinf setup file?
...
 
It is not too hard if you understand the mechanism behind. Right click the mouse button on screen,a <Modify Item> menu appear right beside the mosue pointer. Select the balloon that you want to modify.Right click again and select <Mod Attach>, once you pick the <Mod Attach> select <On Surface> on the <ATTACH TYPE> menu. Pro/E only allow you to select the surface which belongs to part. Use <query sel> to make sure you select the correct part which the balloon belongs to. If you found this procedure too lenghtly to perform, you can automate it by using Mapkey.

Chris

Latif Tastan wrote:
I think this is a defective side of Pro/E,
after putting BOM ballons automaticly, very hard to arrange them by manual

Ron Marion wrote:

> To my knowledge, Pro/E doesn't have any type of configuration or drawing
> setup file option to support the type of behavior that you desire. That
> would be nice.
>
> Regards,
>
> Ron Marion
...
 
thank you, this is better to arrange them,
i think you're very good in using of Pro/E :)

Chris Chan wrote:

It is not too hard if you understand the mechanism behind. Right click the mouse button on screen,a <Modify Item> menu appear right beside the mosue pointer. Select the balloon that you want to modify.Right click again and select <Mod Attach>, once you pick the <Mod Attach> select <On Surface> on the <ATTACH TYPE> menu. Pro/E only allow you to select the surface which belongs to part. Use <query sel> to make sure you select the correct part which the balloon belongs to. If you found this procedure too lenghtly to perform, you can automate it by using Mapkey.

Chris

...
 
Status
Not open for further replies.

Latest threads

Back
Top