ProNC Group?

Discussion in 'Pro/Engineer & Creo Elements/Pro' started by SeanK, Mar 14, 2005.

  1. SeanK

    SeanK Guest

    I used to be subscribed to a ProNC dedicated group but can no longer find
    the reference/name - anyone help?

    Cheers, Sean


    In the meantime.....

    I've been using ProNC for milling for quite a while but am now starting on
    the turning.

    A have a concave hemisphere I want to machine. To make my tool a boring bar
    I've simply rotated it through 90 using tool_orientation the parameter - is
    this the accepted method?

    I've created an AREA sequence and by default the tool removes matls
    travelling along the z and steps in the x. Can I change the slice
    orientation and remove matl in the z slices - facing each layer?

    Cheers, Sean
     
    SeanK, Mar 14, 2005
    #1
  2. SeanK

    peterdouglas Guest

    Sean,

    The manuf newsgroup at ptcuser.org may be what you are looking for.

    Regards
     
    peterdouglas, Mar 18, 2005
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. searching this group

  2. error: bad DXF group: ((1 2.61126))

  3. "Undefined group code" in ELLIPSE

  4. Adjusting a group of (stacked) TEXTs to avoid overlapping

  5. solid group codes

  6. DXF file, HEADER, and group codes for direction

  7. Create Group and Access by Name - Invalid Group Name Error

Loading...