Problems with Plot Files

Discussion in 'AutoCAD' started by jperrotta, Sep 9, 2004.

  1. jperrotta

    jperrotta Guest

    I recently created plot files for a 55 drawing set. I noticed in some of the drawings some of the viewports plotted in color instead of the intended black and white. To correct the problem I had to go into the drawing and copy the properties of one of the viewports that plotted correctly to the color-plotting viewport. The properties of all the viewports appeared to be the same before I did the properties copy so I have no idea what went wrong the first time. Any ideas?
     
    jperrotta, Sep 9, 2004
    #1
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. writing DXF files, problems with extrusion direction

  2. Spectre problems with PWL in stimulus files

  3. problems with Microstation V8 files converting to V7

  4. Problems with "cut with surface" when working with "spilt"

  5. Generating DXF files, problems with extrusion direction

  6. Bleed problems with plot outputs

  7. Batch plot creates plot files

  8. problems with plt files

Loading...