Pro NC

Discussion in 'Pro/Engineer & Creo Elements/Pro' started by hmcdee, Feb 26, 2004.

  1. hmcdee

    hmcdee Guest

    Hi,
    I am looking for a post processor for two new machines we have
    purchased
    Miyano Lathe and Charmilles wire eroder.
    I use wildfire at the moment but would be able to use 2000 or 2001 if
    that suited. I know you can write your own posts in proe but i'm
    afraid i don't know how.
    Thanks
     
    hmcdee, Feb 26, 2004
    #1
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Pro/Desktop <> Pro/E wildfire

  2. Pro/Mold & Pro/Cast

  3. need help finding tutorials for Pro/nc and pro/cmm

  4. 2005/05/22 PTC Pro Engineer Wildfire V2.0 M120, PTC Pro Engineer Wildfire V2.0 For XP64, new !

  5. Pro-Engineer (Pro-E) opening in Chennai 4+Years ( other Openings UG and CATIA V5)

  6. Pro/E, Pro/M help

  7. problem with pro E and pro Mechanica integration

  8. Speed of 64-bit Pro/E and Pro/M?

Loading...