Printable Area in 2004

Discussion in 'AutoCAD' started by elenaA, Jul 14, 2004.

  1. elenaA

    elenaA Guest

    I set my printable area at 0 to be able to utilize our existing border. That worked in the layout and in print preview, however my plotter hp design jet 1050c compensates for this and plots my 24x36 in. paper at 25x36 in. If any one can help me get around this please let me know, otherwise I have a lot of work to do on ALL of our borders.

    Pleas help!
    Elena
     
    elenaA, Jul 14, 2004
    #1
  2. elenaA

    wfb Guest

    Check your manual for LEADING and TRAILING edges. You should have two
    options, one is Normal and one is Extended. These are minimum distances to
    your printed area and it also varies with using either ROLL paper or Single
    Sheets.


    | I set my printable area at 0 to be able to utilize our existing border.
    That worked in the layout and in print preview, however my plotter hp design
    jet 1050c compensates for this and plots my 24x36 in. paper at 25x36 in. If
    any one can help me get around this please let me know, otherwise I have a
    lot of work to do on ALL of our borders.
    |
    | Pleas help!
    | Elena
     
    wfb, Jul 14, 2004
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Modify Printable Area - only works once

  2. dwf printable area?

  3. Printable area way smaller then papersize

  4. Printable Area Shifting

  5. ADT2 - hp designjet 500 - printable area issue

  6. hp 1050C Printable Area

  7. Plotting Problem-Printable Area

  8. Fit to Paper Size NOT Fit to Printable Area??

Loading...