PR warning: cannot find a legal location for instance-soc encounter

Discussion in 'Cadence' started by renee, Jul 22, 2008.

  1. renee

    renee Guest

    I used encounter to do place and route. My design contained 4
    instances, and when it is imported into encounter, it was 4, but it
    was 2 when I did the place-> standard cells and blocks. There were 2
    warnings:

    WARNING: SOCSP-2020: cannot find a legal location for instance I0.

    WARNING: SOCSP-2020: cannot find a legal location for instance I3.

    It then asked me to check the design and floorplan.

    The cell's orgin is (0,0), and when I specified the floorplan, the
    design browse window still showed 4 instances.

    Why did it say "cannot find a legal location"? Athough I tried the
    "legalize floorplan", no change happened. How can I solve this
    problem?

    Thanks in advance!

    Renee
     
    renee, Jul 22, 2008
    #1
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. what must be associated in verilog file with LEF when imported in the SOC ENCOUNTER?

  2. SoC Encounter

  3. SoC Encounter via array.

  4. About floorplan and route using SOC Encounter

  5. problem about timing analysis in soc encounter

  6. What do these two tools used in?? (1st Encounter / Soc Encounter)

  7. WARNING WARNING WARNING don't use the shade comand if ObjectARX applications are missing

Loading...