plotter

Status
Not open for further replies.

Enrico Ferrarese

Usenet Archive
Joined
Jan 5, 2002
Messages
1
Reaction score
0
I have a problem with a big dwg file (about 43mb), I've tried several times to plot it and in several ways but it always make the plotter go in error at a half print. My Pc is enough powerful (Atholn 1.2Gz and more than 512 mb of ram) and the plotter is an HP designjet 500 with 32 mb. I've even tried to do a plt files and then to plot it but nothing.
Can someone
 
I have a HP designjet 650 with 256 MB memory, never had problems with dwg-files larger than 43MB.

Maybe you should consider a memory-upgrade.
Or splitting the file into smaller pieces.

"Enrico Ferrarese" schreef in bericht

I have a problem with a big dwg file (about 43mb), I've tried several
times
to plot it and in several ways but it always make the plotter go in error
at
a half print.
My Pc is enough powerful (Atholn 1.2Gz and more than 512 mb of ram) and
the
plotter is an HP designjet 500 with 32 mb.
I've even tried to do a plt files and then to plot it but nothing.
Can someone
 
On Sat, 5 Jan 2002 11:03:46 +0100, "Enrico Ferrarese"
wrote:

- which driver (AC driver, HP Win driver)?
- plotter with HP-GL/2 module or w/o (= HP-RTL only)?

N.
 
- which driver (AC driver, HP Win driver)?

the generic one that came with windows 2000
I didn't have to DL another one

- plotter with HP-GL/2 module or w/o (= HP-RTL only)?

not sure what you mean by this (memory?)

Y.S.
 
On Sat, 05 Jan 2002 16:37:47 GMT, "Filip"
wrote:

the generic one that came with windows 2000
I didn't have to DL another one

you may want to check is something newer is avail by HP:
http://www.hp.com/cposupport/

> - plotter with HP-GL/2 module or w/o (= HP-RTL only)?

not sure what you mean by this (memory?)

as I understood the DJ500 is a low-end model of HP which doesn't support the HP-GL/2 graphics language (vector data) by default but only the raster format HP-RTL. HP also has an optional HP-GL/2 module which can be plugged-in to the plotter, of course to buy.

If you are currently using the HP driver in HP-RTL (which probably is the default) you should not have any memory problems with the plotter because the plotfile is rendered at you system (thus the big size of the plotfiles) and than spooled to and /printed line by line by your plotter.

N.
 
Right. Since when does a 650 support more than 68 MB of onboard RAM? The A series is even less, at 20 MB.

Make sure you download the latest HP-optimized driver for the HP500 series from HP's website, and if you don't have the HP-GL/2 module for the printer, get it and install it. You might also want to have the plot spool in the computer, rather than the printer. I've had that problem, and changing the spool setting worked.
 
Status
Not open for further replies.

Latest threads

Back
Top