OCE 9600 or TDS 600 Plot Problems

Discussion in 'AutoCAD' started by Stu, Nov 7, 2003.

  1. Stu

    Stu Guest

    I have an OCE TDS600 plotter and Autodesk LDT3 (2002)

    I have a specific issue that occurs on drawings with TIFF images
    attached. Other drawings are unaffected.

    The problem is, when I plot the drawing to the exact sheet size, the
    entire plot looks like TV Static. Plotting to a larger sheet size (or
    smaller) plots properly.

    The sheet sizes I use have no margins set, and the plotter
    configuration is set to cut at the Plot Size. Different Top, Bottom,
    Left, Right margin combinations produce different results as far as
    producing static or a readable plot.

    We have installed the latest Windows and HDI drivers, and I have
    created new PC3 files from scratch.

    The plotter seems sensitive to zero margins in the sheet setup, and I
    am at a loss to explain why this occurs. We have an identical plotter
    at another office location with the exact same setups and this plotter
    produces readable plots 100% of the time.

    Asssitance will be very much appreciated.
     
    Stu, Nov 7, 2003
    #1
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.