Nvidia Quatro FX3500 Problem

[Marty SLC]

Nvidia Quatro FX3500 Problem

Specs:
Motherboard: Intel (Came with onboard video but I think I have it
diabled.)
Ram: 4gigs DDR 800, Brand: OZ
Graphic Card: Nvidia Quatro FX3500 (current drivers: 8.4.2.6)
Operating system: XP sp2
Solidworks: 2007, sp3.1

--------------------------------------------------------------------------------------------------------------

Has anyone run into the problem of it taking forever to startup
Solidworks? Take like a minute before SW will open and only does when
the video card fan fires up. It's like there's some sort of a
conflict between something and the video card. This problem is worse
is other cad programs I run. Once it opens and I get a part loaded
it's great! But if close SW and reopen it sits with the hour glass
until the fan on the card starts up.

Any help would be really appreciated.

-Marty

 

[Wayne Tiffany]

My first thought is make sure that you have any on-board video disabled.
They may be fighting.
Second thought is go into the nVidia settings and set the custom OGL setting
to SolidWorks.

WT

 

[Marty SLC]

My first thought is make sure that you have any on-board video disabled.
They may be fighting.
Second thought is go into the nVidia settings and set the custom OGL setting
to SolidWorks.

WT

Wayne,
I have done both of your thoughts were my thoughts too. Any other
thoughts I could try???

Thanks,

Marty

 

[Wayne Tiffany]

What if you start in software OpenGL mode? Does the time change?

WT

 

[Marty SLC]

What if you start in software OpenGL mode? Does the time change?

WT

It's our Novell network, some how it conflicts with Nvidia cards
only. ATI cards run great.

Thanks for the help !