monte carlo analysis help

Discussion in 'Cadence' started by jc, Apr 27, 2006.

  1. jc

    jc Guest

    I need information about how to run montecarlo analysis in spectreS ,i
    read some material
    but idon't know where model files are available and how to change it to
    run monte carlo
    In our lab we aare using IC5.0 . Plz clearly expain me ,i am also new
    to solaris.
    Thanks in advance,
    Jc
     
    jc, Apr 27, 2006
    #1
    1. Advertisements

  2. jc

    John Gianni Guest

    Try this Monte Carlo simulation step-by-step setup guide by Vikas
    Sharma (with help from Michael Perrott of the Massachusetts Institute
    of Technology, Phillip Allen of the Georgia Institute of Technology &
    Andrew Beckett at Cadence).

    http://eceserv0.ece.wisc.edu/~sharmav/monte.ppt

    That powerpoint presentation walks you through the entire process,
    covering every step on a sample LNA & PLL, from Monte Carlo setup to
    simulation to final analysis, at:

    If that guide doesn't do the trick, try these University of Colorado at
    Boulder Monte Carlo simulation setup instructions by Prof. Regan A.
    Zane.

    http://ece-www.colorado.edu/~ecen5007/cadence/Monte_Carlo.html

    If both fail you, there should be tutorials & user guides on the Monte
    Carlo model-file setup on Sourcelink.

    Good luck,
    John Gianni
    "Nothing I post is prior sanctioned nor reviewed by my employer!"
     
    John Gianni, Apr 28, 2006
    #2
    1. Advertisements

  3. jc

    jc Guest

    Thank u very much those very helpful , I will try those



    Thanks and regards
    JC
     
    jc, Apr 28, 2006
    #3
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.