Modeler News or lack of! (Warning: long)

Status
Not open for further replies.

dangermouse

Usenet Archive
Joined
Aug 8, 2001
Messages
18
Reaction score
0
Just thought I would relate the following interesting tale:

Last week I went to a Bentley Microstation V8 "Open It Up" Seminar (in Sydney, Australia). To start the day off was a very slick, very hyped-up, 5 minute .avi movie pumping out every type of cliche related to "performance". You know the type: image of athletes sprinting out of the blocks, cut to space shuttle lifting off, cut to engineering type people shaking hands in a conference room, cut to motorcycles racing around a circuit etc. etc. This was fine. This was what I expected. Next on the program was a powerpoint presentation by one of the head honchos of Bentley Systems Australia ( I figured at the time that Keith Bentley was no doubt too busy to come out to Sydney as he was sorting out the last couple of annoying little bugs from the release code for Modeler V8 so that he could surprise us with an early January launch). Now this powerpoint presentation was very professional and had the appearance that it had been sent out from Bentley's Head office in the US. I was quietly getting excited about becoming a member of the "V8 Generation" when the presenter started talking about the Engineering configurations. As a Modeler user my ears pricked up and I enthusiastically looked at the powerpoint slide. There was the list of configurations and guess what: No Modeler! Not mentioned at all! Resisting the urge to leave I endured the rest of the light and sound show. After the show I managed to corner the above mentioned presenter. The conversation went something like this (note I will refer to my dialog as "Me" and call the bentley honcho "Presenter 1"):

Me: "I noticed that Modeler was conspicuous by it's absence from your slide showing the Engineering Configurations."

Presenter 1: "Oh, was it. I didn't realise that. I must have a closer look at that." (Not a good start)

Me: "Does this mean Modeler is not going to be developed for V8?" (go straight for the throat)

Presenter 1: "Ahh, err, ummm, no, no, of course it will." (is this what English scholars call a double negative?)

Me: "Any idea of a release date?" (Presenter 1 appears very uncertain and uncomfortable in his nice new "V8 generation" t-shirt. Good thing I had a colleague with me or he may have bolted.)

Presenter 1: "Arr, err it was Q1 but now looks like Q2."

Me "So probably June /July 2002?"

Presenter 1 "Umm yeah" (He turns to one of his co-presenters) "Modeler release date is Q2 isn't it?"

Presenter 2 "Modeler? Last word was that it is on hold." (On hold!! Uh oh!
This is serious batman!)

Me: "Is the release date on hold or is development of modeler on hold?" (How is that for a $64000 question?)

Presenter 1: "Ahh umm err, apparently an executive decision is to be made by Head Office on Modeler." ("Executive Decision". Gee, just take it outside and shoot it now!)

Presenter 1: "I will try to find out more and get back to you." (That would be nice.)

Me: "So the rumour that modeler was almost canned for V8 is true?

Presenter 1: "Yes".

Me: "Is this an economic decision? Is the user-base too small?"

Presenter 1: "No No. In Australia and New Zealand there are around 60 Modeler licenses."

At this point I had heard all that I needed.
Bloody Hell! Only 60 licenses! I always considered our small design office as totally insignificant in the Oz CAD market but now I find out that our 13 modeler licenses account for 20% of the Mstation Modeler business in Australia and New Zealand! No wonder our Select support requests go unanswered.

The presenter made great noise about contacting Bentley Head Office and getting back to me as soon as possible. It has been a week and no contact at all so far so here I am passing on this story. You be the judge.

Personally I now feel Bentley has completely shifted it's focus to the civil/architectural market so it is probably time to start looking at cad systems which focus on mechanical solid modelling (ie Solidworks, Solidedge, Ironworks etc.)

Regards
Danger mouse.
 
Get a demo of SolidWorks 2001+ (Very good support)

<sni

---
 
Hi DM,
Why did you not post this in the moderated bentley.microstation NG as well. You have a very good chance of receiving a reply of some sorts. Non-committal of course as usual, but a reply nevertheless.
 
Status
Not open for further replies.

Latest threads

Back
Top