Model Revisions

Discussion in 'Pro/Engineer & Creo Elements/Pro' started by 1-2-3, Nov 17, 2006.

  1. 1-2-3

    1-2-3 Guest

    First of all, I want to take this opportunity to thank all the people
    that take the time to answer all the questions, the good
    and the bad ones.

    How do you keep track of the latest revision levels in the model?

    When I go to Info>Relationships & Parameters, I see ProI_revision="A",
    but how do I change the rev level to B or higher.

    I tried: Tools>Parameters>Modifiy, but ProI_revision is not listed to
    make the change.

    In the drawing, I change the rev letter in the title block going thru
    the Properties, but I don't think this the correct way of doing it.

    Any suggestions?
     
    1-2-3, Nov 17, 2006
    #1
  2. 1-2-3

    David Janes Guest

    Sounds like maybe you have a part/drawing from Pro/INTRALINK (ProI) which
    puts its own system parameters in Pro/e files. These parameters can only be
    changed within Intralink. Does your Pro/e run in an Intralink environment?

    David Janes
     
    David Janes, Nov 17, 2006
    #2
  3. 1-2-3

    huggre Guest

    proi_revision is a parameter controlled by Intralink and can only be
    changed by modifying the revision in Intralink.

    Hugo
     
    huggre, Nov 20, 2006
    #3
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.