MicroStation Access Violation Errors

Discussion in 'Microstation' started by miknahc, Jan 17, 2009.

  1. miknahc

    miknahc Guest

    When I try to open certain MicroStation files an "Internal Error" box
    pops up stating: "Access Violation occurred at 0x00000000. Press OK to
    continue, Cancel to exit". Selecting either option usually closes the
    whole program.

    What is truly odd about this problem is that it only happens with some
    files more recently. All my past work can be opened and run without
    hesitation. Also, these same files I have trouble with on my computer
    can easily be opened and edited on my other co-workers computers.
    Odd isn't it?

    Does anyone have any ideas as to what could be causing this and what
    action I can take to relieve this problem?
    Thanks so much for any help!

    -Kimberly
     
    miknahc, Jan 17, 2009
    #1
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. error: Exception occurred: 0xC0000005 (Access Violation)

  2. ; error: Exception occurred: 0xC0000005 (Access Violation)

  3. unhandled access violation

  4. ACCESS VIOLATION ERROR

  5. Changing Profile at Document Activate Event causes Unhandled Access Violation

  6. FATAL ERROR: Unhandled Access Violation Writing 0x130fe05 Exception at 654677b6h

  7. Fatal Error: Unhandled Access Violation Reading 0X0004 Exception at 766281h

Loading...