Lineweight zero print thickness

Status
Not open for further replies.

Tom Powers

Usenet Archive
Joined
Jul 25, 2001
Messages
5
Reaction score
0
Ladies and Gentlemen,

Does anyone know how to change the printed line thickness of elements with line weight zero. I would expect that it would be possible within the print driver however I don't know how, and don't want to cause errors. I generally use the printer.plt, or hpglrtl.plt. I would think it must be possible because the microstation line styles (1-9) all print very thin compared to elements with line weights of zero. I am still using microstation J Version 7.1.00 62

Any help you can provide would be appreciated. Thanks-Tom Powers
 
"Tom Powers" wrote:

Ladies and Gentlemen,

Does anyone know how to change the printed line thickness of elements with line weight zero. I would expect that it would be possible within the print driver however I don't know how, and don't want to cause errors. I generally use the printer.plt, or hpglrtl.plt. I would think it must be possible because the microstation line styles (1-9) all print very thin compared to elements with line weights of zero. I am still using microstation J Version 7.1.00 62

Any help you can provide would be appreciated. Thanks-Tom Powers

Hi Tom,

Have you try using pentables to attain your plotting output? You can set the proper pentables on each color by lineweights and save the pentable.tbl file same as in Autocad and don't be scared to edit plot drivers file like printer.plt and hpgl2.plt or any other plt files. if you think you change some parameters and it didn't work it doesn't mean you have spoil Microstation itself just always keep in mine to backup first the original plt file that you want to altered then save a new plt file that you want to use always. If you load it and it doesn't work then load your backup plt file that simple everything you need to change for plotting thickness to linetypes you can change in plt file without pentables.

Here is a good website be a member and learn more about plotting on plt files.

Internet Websites:

http://www.askinga.com - Free Membership
http://www.cadgurus.com

You won't regret on registering because you will learn a lot.
Hope this help you a bit.

Cheers,

Mel Arquiza
Home Page Design
http://hpd.welcome.to
 
Status
Not open for further replies.

Latest threads

Back
Top