line distortion

Discussion in 'AutoSketch' started by tom smoker, May 16, 2004.

  1. tom smoker

    tom smoker Guest

    After I draw a line or polyline that appears straight, it distorts slightly after changing views. Is this possibly a video issue. I can print the same drawing twice and the results are not the same. The distortion seems to change with different levels of zoom.
     
    tom smoker, May 16, 2004
    #1
  2. tom smoker

    molucca Guest

    You might try to see if you can find an update to your printer driver. M
     
    molucca, May 17, 2004
    #2
  3. tom smoker

    Len Rafuse Guest

    On screen I have had this happen. If you zoom in it should look OK (no
    jumps or distortions.)

    If it prints funny, your print driver would be something to update.
     
    Len Rafuse, May 17, 2004
    #3
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. draw line to middle of 2 picked lines then offset that line help...

  2. how to read line by line from a file through a OCEAN script

  3. Insert a Cell on an angled line, and have the line break - automatically?

  4. Insert a Cell on an angled line, and have the line break - automatically?

  5. Distortion

  6. NEED: Single Line Font... (must be single line inside SW also, nptjust MS Word)

  7. Drawing line on command line.

  8. object distortion

Loading...