Is "net looping" a problem in "Connectivity Verification" of SE?

Discussion in 'Cadence' started by walala, Sep 4, 2003.

  1. walala

    walala Guest

    Dear all,

    I used SE to do a P&R of a simple design. After all succesfully
    placement and route, I do the "Verification of Connectivity" check:

    The result:
    ------------------------------------------------------------------

    17:17:23 **** Net gnd!: loop.
    17:17:30 **** Net vdd!: loop.
    ** SE-USER-64 PROBLEM **
    17:17:30 ** Found Problems. **
    ** CADENCE-USER-53 WARNING **
    Input source will abort at next read due to limit of 1 PROBLEMs.
    17:17:30 **** Begin Summary (see file verify.log for details)
    17:17:30 **** 2 Problem(s) [ 93]: The net has a loop.
    17:17:30 **** 2 total info(s) created.
    17:17:30 **** End Summary
    17:17:30 **** End: VERIFY CONNECTIVITY ********

    ------------------------------------------------------------------

    Can anybody tell me is this a problem and can I just ignore it?

    Thanks a lot,

    -Walalla
     
    walala, Sep 4, 2003
    #1
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Special Hatch Problem

  2. UCS Direction problem.

  3. Entmake 3D Polyline Problem without attachment

  4. strcat problem

  5. (dos_getfiled) problem with acad2000

  6. Is this a variable problem?

  7. Error Problem - Plotting Problem

  8. Error Problem - Plotting Problem

Loading...