Invisible dimensions.

Status
Not open for further replies.

E.J. Koeze

Usenet Archive
Joined
Dec 8, 2001
Messages
2
Reaction score
0
Being faily new to Microstation I have a question for you people. One of my collegues has recentle had a number of drawings with invisible dimensions. They cannot be printed or seen, but they can be selected by select by attributes an by mouse (tentative). Level for dimensions is standard level 51 (with us) and this level is on because other dimensions are visible. If I ask for elemment information I have noticed that either point 1 is 0,0,0 or point 2 is 0,0,0 or both. The normally visible dimensions have describe 2 3d point (x,y,z)

Anybody experienced this too or anyone with a solution please reply. Any help would be appreciated.

E.J. Koeze

Microstation SE
running on PIII800 Win 98 SE Machine
 
Dimension element display is probably off.
Select Settings > View Attributes from the menu. Make sure Dimensions is checked. Click the apply button to turn dimsions on in the view noted at the top of the dialog box or click the ALL button to turn them on in all views.
 
That's not it.

In the active design were a number of dimensions that were visible.

"Stephen Mussler" schreef in bericht

Dimension element display is probably off.
Select Settings > View Attributes from the menu. Make sure Dimensions is checked. Click the apply button to turn dimsions on in the view noted at the top of the dialog box or click the ALL button to turn them on in all views.
dimensions.
> They cannot be printed or seen, but they can be selected by select by
> attributes an by mouse (tentative). Level for dimensions is standard
level
> 51 (with us) and this level is on because other dimensions are visible.
> If I ask for elemment information I have noticed that either point 1 is
> 0,0,0 or point 2 is 0,0,0 or both. The normally visible dimensions have
> describe 2 3d point (x,y,z)
>
> Anybody experienced this too or anyone with a solution please reply. Any
> help would be appreciated.
>
> E.J. Koeze
>
> Microstation SE
> running on PIII800 Win 98 SE Machine
...
 
I've run into invisible dimensions in two types of situations:

1. After placing multi-line notes, later editing of the notes such that the number of lines of text was changed has often caused not only loss of association between the cell (multi-line text) and the dimension element (line with arrow), the dimension element frequently became invisible. The fix was to delete and replace the dimension element, and try not to modify the number of lines of text in the note. This may have been fixed in later versions of J, but I think notes placed before the fix may still exhibit the problem.

2. When working in files supplied by a contractor, the Dimension Lines level (in Dimension Settings) was set to 0 - (which, believe it or not, is the default setting for that item). This caused problems when using the Place Multiline Note command. Interestingly, the invisible element was not the leader as you would expect, but the cell containing the multi-line text. The leader went on the active level, where the cell should have been, while the cell went on the non-graphic level 0. The fix was to move the elements to the correct level (may have used Axiom's FileFixer for this) and to set the Dimension Lines level to anything but 0 and Save Settings to prevent a recurrence of the problem. It has been a while since I worked with those files. The cell may not have been invisible, but rather, the display could not be turned off or something along that line.

One other possibility: In the affected files, is it possible that the dimensions are a color that is the same as the background? Dimensions might have been placed with one color table attached and then someone attached a new color table. Level Symbology might also be a possibility if color has anything to do with your problem.

Larry Whitt

"E.J. Koeze" wrote:
Being faily new to Microstation I have a question for you people. One of my collegues has recentle had a number of drawings with invisible dimensions. They cannot be printed or seen, but they can be selected by select by attributes an by mouse (tentative). Level for dimensions is standard level 51 (with us) and this level is on because other dimensions are visible. If I ask for elemment information I have noticed that either point 1 is 0,0,0 or point 2 is 0,0,0 or both. The normally visible dimensions have describe 2 3d point (x,y,z)

Anybody experienced this too or anyone with a solution please reply. Any help would be appreciated.

...
 
"E.J. Koeze" wrote:
Being faily new to Microstation I have a question for you people. One of my collegues has recentle had a number of drawings with invisible dimensions. They cannot be printed or seen, but they can be selected by select by attributes an by mouse (tentative). Level for dimensions is standard level 51 (with us) and this level is on because other dimensions are visible. If I ask for elemment information I have noticed that either point 1 is 0,0,0 or point 2 is 0,0,0 or both. The normally visible dimensions have describe 2 3d point (x,y,z)

Anybody experienced this too or anyone with a solution please reply. Any help would be appreciated.

...

The dimension may have been drawn on the construction level? Go to pulldown Settings> View attributes. Apply each of the settings (that sound as if they may be causing the problem) and apply the setting and update your view. I have seen my share of drawings that are totally If there are attachments send them also.

redbyrd
 
Status
Not open for further replies.

Latest threads

Back
Top