Intralink 3.1

Status
Not open for further replies.

Rainer Harter

Usenet Archive
Joined
Jan 12, 2000
Messages
60
Reaction score
0
Does anybody already use Intralink 3.1?
We've planned to upgrade from Intralink 2.0 1999500 to Intralink 3.0 this January.
But: there is this "include drawings"-bug in R3.0 so I thought that maybe it would be wiser to install R3.1.

What is your experience with 3.1? What is the difference between 3.0 and
3.1?

P3-800
1GB RAM
Win NT4
still 2000i

Thanks, Rainer
 
Do you have a TAN number so I can look up the problem in PTC's KDB

Peter

"Rainer Harter" wrote:

Does anybody already use Intralink 3.1?
We've planned to upgrade from Intralink 2.0 1999500 to Intralink 3.0 this January.
But: there is this "include drawings"-bug in R3.0 so I thought that maybe it would be wiser to install R3.1.

What is your experience with 3.1? What is the difference between 3.0 and
3.1?

P3-800
1GB RAM
Win NT4
...
 
Intralink3.0 -include drawings: TAN 111629

Peter Johnson schrieb:

Do you have a TAN number so I can look up the problem in PTC's KDB

Peter

"Rainer Harter" wrote:

> Does anybody already use Intralink 3.1?
> We've planned to upgrade from Intralink 2.0 1999500 to Intralink 3.0
> this January.
> But: there is this "include drawings"-bug in R3.0 so I thought that
> maybe it would be wiser to install R3.1.
>
...
 
I would like to get some information too on INTRALINK 3.1 performance.

Sal

Rainer Harter wrote:
Does anybody already use Intralink 3.1?
We've planned to upgrade from Intralink 2.0 1999500 to Intralink 3.0 this January.
But: there is this "include drawings"-bug in R3.0 so I thought that maybe it would be wiser to install R3.1.

What is your experience with 3.1? What is the difference between 3.0 and
3.1?

P3-800
1GB RAM
Win NT4
...
 
We have a beta 3.0 server that we just updated to 3.1. (We need some additional features for a Windchill implementation that we are starting.)

The "include Drawings" bugs is not fixed. (TAN/TPI #111629) There is another issue that is unresolved as well - SPR#917489 - When viewing information from a drawing in commonspace or pro/locate it takes extremely long (average 5 - 7 minutes in my testing). It works fine in a workspace (seconds) and parts and assemblies work well in commonspace.

On the other hand the list of resolved TAN/TPIs is a page long.

We have not done any benchmarks yet, but 3.1 seems the same or a little faster. Both Oracle and Java (JRE) have been updated.

The documentation can be found online at the PTC support site, or you can order the CD. The Read this First is in the Documentation section of the website and on the CDs. They have vastly improved the Help documentation in 3.1 from 3.0 and it is actually organized in a useable fashion.

Regards,
Jeff Zemsky
Plug Power
 
I was also waiting and waiting to upgrade from 2.0 1999500. Went ahead and did 3.0, with all it's probs because PTC told me that there was no upgrade path for 2.0 to 3.1.

On Wed, 09 Jan 2002 10:19:17 +0100, Rainer Harter
wrote:

Does anybody already use Intralink 3.1?
We've planned to upgrade from Intralink 2.0 1999500 to Intralink 3.0 this January.
But: there is this "include drawings"-bug in R3.0 so I thought that maybe it would be wiser to install R3.1.

What is your experience with 3.1? What is the difference between 3.0 and
3.1?

P3-800
1GB RAM
Win NT4
...
 
I received the 3.1 CDs (language version) yesterday. But: we also need Toolkit Access 3.1 (lv) and nobody at PTC could tell me when it will be released...

I have heard a lot of different informations, for example: "it should be released allready" or "at the end of March"

Rainer

anon schrieb:

I was also waiting and waiting to upgrade from 2.0 1999500. Went ahead and did 3.0, with all it's probs because PTC told me that there was no upgrade path for 2.0 to 3.1.

On Wed, 09 Jan 2002 10:19:17 +0100, Rainer Harter
wrote:

>Does anybody already use Intralink 3.1?
>We've planned to upgrade from Intralink 2.0 1999500 to Intralink 3.0
>this January.
>But: there is this "include drawings"-bug in R3.0 so I thought that
>maybe it would be wiser to install R3.1.
...
 
I had talked to Rainer about 3.1 and mentioned I'd be installing a test seat this week. Well, I tried to install it yesterday.

first try: application exit...memory address error
second try: Same thing, different spot in the install
third try: crashed during database creation
fourth try: installed 'perfectly' :) through the file server and dataserver. crashed immediately after dataserver was finished. client then installed fine after restarting setup.

This was a clean install, not over an existing version and there was also a lot of hassles after the crashes because it knew some stuff was installed. so I tried allowing it to recopy the files for the second try. for the third try, i deleted all files manually before starting.

The system is and Athlon 1.2 running Win2000 Pro SP2

I'm gonna wipe this whole thing clean and try again from scratch.

I'll post to let you know what happens.

-Jon

"anon" wrote:

I was also waiting and waiting to upgrade from 2.0 1999500. Went ahead and did 3.0, with all it's probs because PTC told me that there was no upgrade path for 2.0 to 3.1.

On Wed, 09 Jan 2002 10:19:17 +0100, Rainer Harter
wrote:

>Does anybody already use Intralink 3.1?
>We've planned to upgrade from Intralink 2.0 1999500 to Intralink 3.0
>this January.
...
 
As I wrote earlier - we updated (manual update on the server) our 3.0 beta server and clients to 3.1 without a hitch. Runs like a dream. Server is NT4.0 SP6a (Toshiba server) and clients are Windows 2000 SP2 (Dell Precision 410)

Check the Read this first document - it lists TAN/TPI that were fixed and those that are still outstanding. The "include-drawings" is unresolved.

Jon - what motherboard and memory combo? - seems like some hardware related errors I have seen on other Athlon machines (DDR memory based)

Good luck.

Regards,
Jeff
"Jon Fawcett" wrote:
I had talked to Rainer about 3.1 and mentioned I'd be installing a test seat this week. Well, I tried to install it yesterday.

first try: application exit...memory address error
second try: Same thing, different spot in the install
third try: crashed during database creation
fourth try: installed 'perfectly' :) through the file server and dataserver. crashed immediately after dataserver was finished. client then installed fine after restarting setup.

This was a clean install, not over an existing version and there was also a lot of hassles after the crashes because it knew some stuff was installed.
...
 
Jeff,

Asus A7V-133 motherboard: Via kt133 chipset
Athlon 1.2
768 mb pc133 sdram
Win 2000 Pro - sp2

I haven't tried reinstalling it yet...but i'll post what happens when i do.

-jon

"Jeff Zemsky" wrote:

As I wrote earlier - we updated (manual update on the server) our 3.0 beta server and clients to 3.1 without a hitch. Runs like a dream. Server is NT4.0 SP6a (Toshiba server) and clients are Windows 2000 SP2 (Dell Precision 410)

Check the Read this first document - it lists TAN/TPI that were fixed and those that are still outstanding. The "include-drawings" is unresolved.

Jon - what motherboard and memory combo? - seems like some hardware related errors I have seen on other Athlon machines (DDR memory based)

...
...
> I had talked to Rainer about 3.1 and mentioned I'd be installing a test
seat
> this week. Well, I tried to install it yesterday.
>
> first try: application exit...memory address error
> second try: Same thing, different spot in the install
> third try: crashed during database creation
> fourth try: installed 'perfectly' :) through the file server and
dataserver.
> crashed immediately after dataserver was finished. client then installed
> fine after restarting setup.
>
> This was a clean install, not over an existing version and there was
also a
> lot of hassles after the crashes because it knew some stuff was
installed.
> so I tried allowing it to recopy the files for the second try. for the
third
> try, i deleted all files manually before starting.
>
> The system is and Athlon 1.2 running Win2000 Pro SP2
>
> I'm gonna wipe this whole thing clean and try again from scratch.
>
> I'll post to let you know what happens.
>
> -Jon
>
> "anon" wrote:
>
...
and
> > >3.1?
> > >
> > >P3-800
> > >1GB RAM
> > >Win NT4
> > >still 2000i
> > >
> > >
> > >Thanks, Rainer
> > >
> > >
> >
 
"Bertil Rogmark" wrote:
Rainer,
is the with-drawings-bug fixed in 3.1?

Bertil

No. There are still 7 known issues with Intralink 3.1.

TAN/TPI's are: 111629, 111886, 11523, 107848, 109414, 108958, 111364.
 
You may want to check out the SPR we had filed today. SPR# 922566 It deals with frame manager functionality, or the total lack of it.

After setting a limit to the number of frames in Preferences >> Application Behavior, for auto purging in workspace. Once a user reaches the limit specified, The workspace corrupts.

Here is the description from the SPR
""""
Pro/INTRALINK will exit or frame information will start getting lost and/or workspace information will start changing unnecessarily when the frame stack size has been reached in the Frame Manager.
"""

So if you set your frame stack size to a high number it might take you a while to catch this one.

Also moving to previous frames and performing an action to overwrite later frames may not work as well. The only thing that may happen is that the CPU pegs at 100% and stays there.

FYI

Joe Barnes

Jon Fawcett wrote:

Jeff,

Asus A7V-133 motherboard: Via kt133 chipset
Athlon 1.2
768 mb pc133 sdram
Win 2000 Pro - sp2

I haven't tried reinstalling it yet...but i'll post what happens when i do.

-jon

"Jeff Zemsky" wrote:
...
 
You may want to check out the SPR we had filed today. SPR# 922566 It deals with frame manager functionality, or the total lack of it.

After setting a limit to the number of frames in Preferences >> Application Behavior, for auto purging in workspace. Once a user reaches the limit specified, The workspace corrupts.

Here is the description from the SPR
""""
Pro/INTRALINK will exit or frame information will start getting lost and/or workspace information will start changing unnecessarily when the frame stack size has been reached in the Frame Manager.
"""

So if you set your frame stack size to a high number it might take you a while to catch this one.

Also moving to previous frames and performing an action to overwrite later frames may not work as well. The only thing that may happen is that the CPU pegs at 100% and stays there.

FYI

Joe Barnes

Jeff Zemsky wrote:

We have a beta 3.0 server that we just updated to 3.1. (We need some additional features for a Windchill implementation that we are starting.)

The "include Drawings" bugs is not fixed. (TAN/TPI #111629) There is another issue that is unresolved as well - SPR#917489 - When viewing information from a drawing in commonspace or pro/locate it takes extremely long (average 5 - 7 minutes in my testing). It works fine in a workspace (seconds) and parts and assemblies work well in commonspace.

On the other hand the list of resolved TAN/TPIs is a page long.
...
 
Intralink 3.0 is very cool.
Yesterday I was looking for the button to start Pro/E without loggig in into Intralink - and there is no such command. Support did verify this. You can have this button with Intralink 3.1 again.

So again I thought about installing Intralink 3.1 instead of 3.0, but we also need to have Intralink Toolkit Access running to correspond with our standard part library - and the 3.1-CDs aren't released yet and nobody at PTC knows when they will. So I opened a call to ask if I could run Ilink3.1 with Toolkit Access 3.0 - although 3.1 uses a newer version of Oracle.

Here is what PTC says:

Customer would like to know if Pro/INTRALINK Toolkit Access 3.0 is working with Pro/INTRALINK 3.1
Status Details:
Sent customer an e-mail saying that it is OK to use the Pro/INTRALINK
3.0 Toolkit Access CD together with Pro/INTRALINK 3.1. What is needed is a Pro/INTRALINK 31. Toolkit Access license.

What do you say?

Rainer
 
Status
Not open for further replies.

Latest threads

Back
Top