Ic6.1.x holds licenses (even in real only mode)

Discussion in 'Cadence' started by bu-bu, Apr 28, 2010.

  1. bu-bu

    bu-bu Guest

    Hello guys,

    i did not post messages for a while now ^^v

    I have a question, i noticed that Ic6.1.3 or Ic6.1.4 licenses
    problems:
    - I open a schematic in edit mode -> license is checked
    -i save and put the schematic in read only -> the schematic license is
    not released.

    I have to "close data" to release the license. and this annoying in
    many cases :(
    Versions we are using:
    IC6.14.500.1
    IC6.13.500.10

    How can i fix that ?

    Thanks a lot for your help :)

    bubu
     
    bu-bu, Apr 28, 2010
    #1
  2. bu-bu

    Dennis Guest


    I imagine you have opened your schematic at the XL level.
    Even in read mode in XL you can edit constraints associated with the
    schematic which does not require the schematic to be open for edit.
    The license is still active for this purpose.
    To release the license without closing your data just switch to the L
    level.
     
    Dennis, Apr 28, 2010
    #2
  3. bu-bu

    bu-bu Guest

    Hello Dennis,

    Thanks a lot for your reply, i did not know that !!

    Best,

    bubu
     
    bu-bu, Apr 29, 2010
    #3
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.