HP 4MV problem

Discussion in 'AutoCAD' started by neil, Apr 8, 2005.

  1. neil

    neil Guest

    Having a problem with plotting in Autocad 2000LT with the 4MV. I keep
    getting a "Float Invalid Operation" on printing, then a crash.
    I had downloaded the new drivers from HP and also the printing patch from
    Autocad. I am using windows 98se.
    I just did some plotting with the old drivers from windows 98 and all seems
    to be OK. So it looks like i will stick with that.
    Is there anyone using the new drivers without any problems ?
    Spent 3/4 days with this, very frustrating.
    Neil
     
    neil, Apr 8, 2005
    #1
  2. neil

    CK Guest

    I agree with Dean on that one. I used that same printer "in a previous life"
    and found that leaving the driver alone, was usually best. It's a great
    printer, but was very fussy.

    just my 2 cents
     
    CK, Apr 8, 2005
    #2
  3. neil

    neil Guest

    It seems to be that way.
    But the new drivers were still good for Windows 95
    Neil
     
    neil, Apr 8, 2005
    #3
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Special Hatch Problem

  2. UCS Direction problem.

  3. Entmake 3D Polyline Problem without attachment

  4. strcat problem

  5. (dos_getfiled) problem with acad2000

  6. Error Problem - Plotting Problem

  7. Error Problem - Plotting Problem

  8. Line weight problems with HP 4MV and Autocad 2004

Loading...