how_to_add_instance

Discussion in 'Cadence' started by selvakumar_in, Jul 12, 2003.

  1. hello there,

    we are having ic 5.0.0 ,how to add a instance in ic 5.0.0 virtuoso
    schematic tool?.

    while i tried to add thro the edit->probe->add instance i can't browse
    for the cadence libraries such as anaologlib,samples etc.,

    your solutions are most welcomed

    regards

    selvakumar
     
    selvakumar_in, Jul 12, 2003
    #1
  2. probably the installation is not OK. I mean Design Kit installation,
    normally there are no problems with Cadence installation. Either the overall
    installation is not OK, either your project has not been set correctly.

    And just a piece of advice - even if somebody had the will to help you, he
    just cannot. You have provided too litle information. It is very useful if
    you attach the "bullshits" that are produced by Cadence when you start it.
    I.e. the log.

    Hristo
     
    Hristo Brachkov, Jul 14, 2003
    #2
  3. selvakumar_in

    snmishra Guest

    Hristo> probably the installation is not OK. I mean Design Kit
    Hristo> installation, normally there are no problems with Cadence
    Hristo> installation. Either the overall installation is not OK,
    Hristo> either your project has not been set correctly.

    Hristo> And just a piece of advice - even if somebody had the will
    Hristo> to help you, he just cannot. You have provided too litle
    Hristo> information. It is very useful if you attach the "bullshits"
    Hristo> that are produced by Cadence when you start it. I.e. the
    Hristo> log.

    Hristo> Hristo

    Hristo> selvakumar> hello there,
    selvakumar>
    selvakumar> we are having ic 5.0.0 ,how to add a instance in ic
    selvakumar> 5.0.0 virtuoso schematic tool?.
    selvakumar>
    selvakumar> while i tried to add thro the edit->probe->add instance
    selvakumar> i can't browse for the cadence libraries such as
    selvakumar> anaologlib,samples etc.,
    selvakumar>
    selvakumar> your solutions are most welcomed
    selvakumar>
    selvakumar> regards
    selvakumar>
    selvakumar> selvakumar

    I think what you want is Add->Instance instead of Edit->Probe->Add
    Instance. You might be better off going through some of the tutorials
    that are included in the Cadence Documentation.

    Regards
    Satya
     
    snmishra, Jul 14, 2003
    #3
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads
There are no similar threads yet.
Loading...