How to make Arrow Head Smaller in i^2

How do you make an individaul arrow head smaller in i^2. I'm trying to
point to the inside of a small radius, and the arrow head is longer than
the radius. I don't want all the other arrows smaller in the drawing,
though.

Thanks,
Larry

 

First, Larry, if you have a feature too small to put a normal sized arrow on, you
should be making a detail view, blown up so you can see it and put a normal sized
arrow on it.

Second, since I wouldn't want to be one of the saps that gets a crummy drawing
with a micro-sized arrow on it, I'm not going to tell you how to make one.

David Janes

: How do you make an individaul arrow head smaller in i^2. I'm trying to
: point to the inside of a small radius, and the arrow head is longer than
: the radius. I don't want all the other arrows smaller in the drawing,
: though.
:
: Thanks,
: Larry

 

Dave,

I only wanted the arrow to be about 80% of the length of the other
arrows, not micro-sized. And the view was already 10:1. I made a custon
arrow using Sketch/Line commands, but was hoping for something a bit
more internalized to proe for this type of need.

Don't worry about getting one of my drawings. I don't give them out to
saps like you!

 

Highlight the dimension/note, click the right mouse button to flip the arrow head
to the outside of the radius. This is the standard, ANSI approved (ANSI Y14.5M)
way of solving your problem.

: Dave,
:
: I only wanted the arrow to be about 80% of the length of the other
: arrows, not micro-sized. And the view was already 10:1. I made a custon
: arrow using Sketch/Line commands, but was hoping for something a bit
: more internalized to proe for this type of need.
:
: Don't worry about getting one of my drawings. I don't give them out to
: saps like you!
:
:
: > First, Larry, if you have a feature too small to put a normal sized arrow on,
you
: > should be making a detail view, blown up so you can see it and put a normal
sized
: > arrow on it.
: >
: > Second, since I wouldn't want to be one of the saps that gets a crummy drawing
: > with a micro-sized arrow on it, I'm not going to tell you how to make one.
: >
: > David Janes
: >
: > : > : How do you make an individaul arrow head smaller in i^2. I'm trying to
: > : point to the inside of a small radius, and the arrow head is longer than
: > : the radius. I don't want all the other arrows smaller in the drawing,
: > : though.
: > :
: > : Thanks,
: > : Larry
: >
: >
: >