how to make a spiral cut PROE/2001

Discussion in 'Pro/Engineer & Creo Elements/Pro' started by roger bernerd, Aug 25, 2004.

  1. roger bernerd

    roger bernerd Guest

    Hello,
    If somebody can tell me how to do an spiral cut.
    PROE VERSION PROE/2001
    I,m French and my english is not so good.
    Thanks for your help
     
    roger bernerd, Aug 25, 2004
    #1
  2. roger bernerd

    hamei Guest


    Do you mean spiral or helical ?
     
    hamei, Aug 25, 2004
    #2
  3. roger bernerd

    Roger BERNERD Guest

    Spiral

     
    Roger BERNERD, Aug 26, 2004
    #3
  4. roger bernerd

    David Janes Guest

    : Hello,
    : If somebody can tell me how to do an spiral cut.
    : PROE VERSION PROE/2001

    The spiral cut is called a helical sweep cut in Pro/e, another language all
    together. The menu picks are 'Insert>Cut>Helical Sweep'. Then you pick some
    attributes of the sweep, such as whether the pitch will be constant and what to
    make the cut profile normal to. Then you create two sketches: first sketch the
    trajectory and an axis of rotation for the helix; then sketch the cut profile
    locked to the trajectory. Lastly, you'll specify a pitch and done.

    David Janes
     
    David Janes, Aug 28, 2004
    #4
  5. roger bernerd

    maopl Guest

    halical cut have to make the boundary for the cutting area first,
    but spiral not need.
     
    maopl, Aug 30, 2004
    #5
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Pro/INTRALINK 3.0 wont start Proe 2001

  2. ProE 2001 refresh problems

  3. Incompatible file version from Proe wildfire (2003) to Proe 2001

  4. ProE 2001 : Screen refresh problems when zoom/pan/spin

  5. ProE 2001

  6. Proe 2001 lento nel caricare gli assiemi

  7. LOFT CUT - how can I make one?

  8. How to make a circular and rectangular cut on a curved surface in SW

Loading...