how to display mass and material in a drawing table

Discussion in 'Pro/Engineer & Creo Elements/Pro' started by dugave_11, Sep 22, 2006.

  1. dugave_11

    dugave_11 Guest

    Hello.
    Is there a nice way to display mass and material properties of the
    assmbly in a table?
    BTW, if I load some material from the file, why does the PRO_MP_MASS
    parameter stays empty even if I run the Model analysis? I want a
    parameter that will automatically change each time I change the model?
    Is this possible?

    Thanks.
     
    dugave_11, Sep 22, 2006
    #1
  2. dugave_11

    David Janes Guest

    The best way I know of requires a BMX (Beharioral Modelling Extension)
    license and the extensive use of analysis features ('Insert>Analysis>Model
    Analysis'). This will let you create a series of model analysis parameters
    as features which will regen and get new values any time you change the
    model. These parameters can be listed in a table, even a BOM table, to show
    those paramter values. My doctor advises against commenting on pro_mp_mass
    because it causes my blood pressure to rise.

    David Janes
     
    David Janes, Sep 23, 2006
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. how to display mass and material in a drawing table

  2. Bill of Material and Family table of Assembly

  3. how to get the selected material for a part to appear in a drawing title box

  4. PDM Mass Drawing Backup

  5. Mass property from a drawing macros

  6. Edit material in design table

  7. Drawing table values linked to values in design table?

  8. Mass Property Values to Design Table

Loading...