How to change the drawing order for lines and symbols?

Discussion in 'Microstation' started by Sandman, May 12, 2005.

  1. Sandman

    Sandman Guest

    Hi folks,

    I have some 2D DGN files, they include lines and cells.
    The cells (is a circle) are "under" the lines, so it seems, the line
    cut the circle cell in two peaces.
    So, how to put the cells up?
    Thanks,
    Regards,
    Artur
     
    Sandman, May 12, 2005
    #1
  2. Sandman

    Phil Chouinard [Bentley] Guest

    If you are using MicroStation V8, put the cells in a Selection Set and go to Edit > Bring to Front.

    BTW, if you haven't yet, you might want to check out the Bentley discussion groups -- see http://discussion.bentley.com/help/ for
    more information.

    Phil Chouinard [www.Bentley.com]
     
    Phil Chouinard [Bentley], May 13, 2005
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Center lines for dimension lines.

  2. how to change the insertpoint of a block,and keep the insert objects's place

  3. SKILL : should the order matter for the plus function

  4. Change Order macro

  5. How do I control the display of finish symbols in part and assembly mode

  6. the logic behind the feature manager tree display order

  7. how to name an object in order to get it later by the name

Loading...