How do I remove tolerance from graphics window??

Discussion in 'Pro/Engineer & Creo Elements/Pro' started by sws, Dec 11, 2007.

  1. sws

    sws Guest

    I am using Wildfire 3 and the other day I was making a drawing and
    could not add tolerances to a dimension. I right clicked on the back
    ground and selected properties, then selected drawing options, then
    found tol_display and set this to yes, problem solved.

    After that setting tol_display to yes I have tolerances showing in the
    graphics window of a part file. I have set the tol_display to no and I
    still have tolerances showing in the graphics window of a part file.

    Is there something else I need to change?

    Steve
     
    sws, Dec 11, 2007
    #1
  2. sws

    sws Guest

    I will answer my own question:

    When I set the tol_display to yes in a drawing it turns on tolerances
    for dimensions in a drawing and a part file graphics window.
    Inorder to turn off the tolerances in the graphics window of a part
    file here is what I did - Tools, Options, type in tol_display select
    "find" set tol_display to no.

    So you have to set tol_display to no in both the drawing and the part
    file.

    Silly me it is so obvious!
     
    sws, Dec 11, 2007
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.