help for a fellow user

Status
Not open for further replies.

Bear

Usenet Archive
Joined
May 8, 2000
Messages
727
Reaction score
0
I have had someone ask me the following question:

I have over 100 small circles in my design file representing gaswell locations. At a plot scale of 1" = 1,000' these are scaled to plot 100' in diameter or
0.1" when measured with an engineering scale.

Now....what I want to do is to use a FENCE to scale these circles up 4x in size. Problem is, not only do the circles scale up but also the relative distance between them.

Is there someway to FENCE SCALE these circles in sixe while maintaining their original origin ? ? ?

I know the obvious answers like do them one at a time or replace the circles with CELLS and use REPLACE CELL but this is a unique instance where I'd like to use a FENCE or element selection tool as this might have applications elsewhere.

Any assistance would be GREATLY appreciated.

I know this can be done with cells, but can it be done with elements.

Thanks,
 
Now....what I want to do is to use a FENCE to scale these circles up 4x in size. Problem is, not only do the circles scale up but also the relative distance between them.

Is there someway to FENCE SCALE these circles in sixe while maintaining their original origin ? ? ?

Hi Bear,

The "Scale" command in uStn V8 has a check box called "About Element Centre" that does this exact thing. you just have to click on the little black triangle at the bottom of the Tool Settings window to see the option.

Regards,
Andrew Novinc.
 
"Bear" wrote:
I have had someone ask me the following question:
I have over 100 small circles in my design file representing gaswell locations. At a plot scale of 1" = 1,000' these are scaled to plot 100' in diameter or
0.1" when measured with an engineering scale.
Now....what I want to do is to use a FENCE to scale these circles up 4x in size. Problem is, not only do the circles scale up but also the relative distance between them.

Is there someway to FENCE SCALE these circles in sixe while maintaining their original origin ? ? ?

Hi Bear,

You might want to try
Scale Element - by Bob Biggar
http://www.cadgurus.com/learn/freedwnl/scalelm.asp

Havent'tested it though.

else try:
Scale Element About Origin - by Bob Biggar
http://www.cadgurus.com/learn/freedwnl/seo.asp

That's a cool mdl called SEO that scales selected items around their origin. Not by Fence, but there's allways the Select By tool in Ustation to help us out.

I know the obvious answers like do them one at a time or replace the circles with CELLS and use REPLACE CELL but this is a unique instance where I'd like to use a FENCE or element selection tool as this might have applications elsewhere.

I had to do a truck load off cell rescaling myself a while ago... didn't have that tool then. Aaargh.

I know this can be done with cells, but can it be done with elements.

SEO can do that, yes.


Welcome.
Ivo

Do not use or distribute this e-mail adress
to 3rd party, without my explicit permission.
Spammers die.
 
Thanks Andrew, but I was after V7.

Sorry, I should have been clearer.
 
"Bear" wrote:
I have had someone ask me the following question:

I have over 100 small circles in my design file representing gaswell locations. At a plot scale of 1" = 1,000' these are scaled to plot 100' in diameter or
0.1" when measured with an engineering scale.

Now....what I want to do is to use a FENCE to scale these circles up 4x in size. Problem is, not only do the circles scale up but also the relative distance between them.

Is there someway to FENCE SCALE these circles in sixe while maintaining ...

Try the "Scale Element about Origin" tool available from cadgurus. I think you may find it useful...

http://www.cadgurus.com/learn/freedwnl/seo.asp

Joolz.
 
You could do this in V8 scale element by fence about origin and translate it back to V7 if that is the required format.
 
Is there someway to FENCE SCALE these circles in sixe while maintaining their original origin ? ? ?

Bear,

Tell them to try this little MDL from Cadgurus.com

http://cadgurus.com/learn/freedwnl/seo.asp

Doug
 
In MicroStation V8 you simply turn on the option: about element center. It supports fences and selection sets.

"Bear" wrote:
I have had someone ask me the following question:

I have over 100 small circles in my design file representing gaswell locations. At a plot scale of 1" = 1,000' these are scaled to plot 100' in diameter or
0.1" when measured with an engineering scale.

Now....what I want to do is to use a FENCE to scale these circles up 4x in size. Problem is, not only do the circles scale up but also the relative distance between them.

Is there someway to FENCE SCALE these circles in sixe while maintaining ...
 
Status
Not open for further replies.

Latest threads

Back
Top