help about the initial condition setting with SpectreS.

Discussion in 'Cadence' started by shzhenyu, Jan 26, 2005.

  1. shzhenyu

    shzhenyu Guest

    Hi everybody,
    I have some problems about the initial condition setting with SpectreS.
    What I have is a sram array with 1024 cells. I would like to initialize
    each cell with either 1 or 0.

    With SpectreS, the only way I know is to use the convergency option and
    then click the node. Is there any other way which is more efficient? Do
    I really need to setup 1024 cells one by one with SpectreS? It is
    really painful.

    Another problem is also about the initial condition. Is there any way I
    can reload the currents and voltage from the last run to the current
    simulation. Let the simulation start from the point it ends last time.
    Thank you very much for your help!

    John
     
    shzhenyu, Jan 26, 2005
    #1
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.