Graphic card for Cadence on RedHat9

Discussion in 'Cadence' started by Cricri68, Apr 23, 2004.

  1. Cricri68

    Cricri68 Guest

    Hello,
    Can somebody gives me an advice on what graphic card
    I should use to run the Cadence flows (IC5.0 / PSD151)
    on a Linux RedHat 9 ?
    I have actualy a G450 with 32Meg of RAM
    but it is to slow in the 24bits color mode
    necessary for IC5.0
    Thanks,
    Christian Illinger
     
    Cricri68, Apr 23, 2004
    #1
  2. Cricri68

    gennari Guest

    I would think any of the modern NVidia GeForce cards would work well. The
    GeForce FX series is excellent for 2D graphics, and the GeForce 4 Ti's
    should also work well and support 3D (though you probably don't need it).
    ATI Radeon 9000 series are also good. Pretty much any modern video card
    would be much better than a G450. You would need to install the drivers from
    NVidia or ATI for hardware support, and you should easily be able to find
    the correct linux drivers. This advice is not specific to Cadence - you just
    need to find a good 2D card and the graphics will be faster.

    Frank
     
    gennari, Apr 23, 2004
    #2
  3. Cricri68

    Kuan Zhou Guest

    hi,
    Even my Graphics Card with only 8 MB video memory work much
    faster than Sun Blade.
    BTW, I bought my video card 5 years ago.

    sincerely
     
    Kuan Zhou, Apr 25, 2004
    #3
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Redhat9 (x86) and Cadence tools?

  2. graphic card

  3. graphic card for wildfire2

  4. graphic card geforce fx5200 128 MB

  5. Best graphic card for SolidWorks 2003

  6. Graphic card for solidworks

  7. low-mid range graphic card recomendations for SW2005

Loading...