get view found by design->hierarchy->descend

Discussion in 'Cadence' started by Erik Wanta, Feb 25, 2006.

  1. Erik Wanta

    Erik Wanta Guest

    I have a schematic associated with a config view. When I do a
    design->hierarchy->descend on an instance in the schematic it opens a
    pop-up box and allows to to select which view to descend into. The
    first option it presents is the view as defined in the config view.
    How do I get this information without going through the descend form?
    That is, how do I get the view that is specified in the hierarchy
    editor for an instance in SKILL?
     
    Erik Wanta, Feb 25, 2006
    #1
  2. Erik Wanta

    fogh Guest

    Hi Erik,

    When i wrote the double click handler (search for "CmDoubleClick" ) I
    remember seeing a switch viewlist that was attached to the current view.
    If you are lucky enough, that is the one that is modified by the
    hierarchy editor. BTW, if you improve the double click function, please
    repost.
     
    fogh, Feb 25, 2006
    #2
  3. Erik Wanta

    Erik Wanta Guest

    Erik Wanta, Feb 25, 2006
    #3
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Changing the level of hierarchy during netlisting

  2. layout wiggle on descend

  3. Change the view in Hierarchy editor for iterative instance

  4. SKILL: Virtuoso command to Save View/Restore View WITH Hierarchy

  5. Question:Schematic hierarchy descend in place using skill

  6. I can't go in the hierarchy of my design

  7. how to get evaluated netSet - schematic hierarchy

  8. Virtuoso -- descend hierarchy prompting

Loading...