FONT STYLE LIBRARIES

Status
Not open for further replies.

mojo

Usenet Archive
Joined
Nov 1, 2001
Messages
12
Reaction score
0
Hi there, hope someone can set me straight.

I want to create different text styles in a drawing format - no problem , 4 text styles different fonts and styling and sizing in the format.

When I create a drawing using this format the style library in the format does not come in to the new drawing. If I want to use different text styles in my drawing my Rand tech supprot tells me I have to recreate the text styles in every drawing.

This seems to take a lot of the common sense out of using text styles to maintain consistent looking drawings- ie set them up once and just subsequently use them in whatever drawing you need as in ACAD, MICROSTATION etc.

Am I missing something??????

Also can these text styles be used on dimensions??????
 
Create a new drawing and leave it blank. Create your style library for that drawing. Save the blank drawing as "start_drawing(etc...).drw". Every time you want to make a new drawing, start by opening this "start_drawing.drw". Your library will be safe and sound here. Use Save As when you are done your drawing. Even if you accidently save over this start drawing, Pro/e saves incrementally so you can find the original.

There are config.pro and sketcher preferences (under andvanced on your sketcher menu I think) to help you with dimensions.

Then call RAND and tell them that they are full of shit.

Dave
 
I agree with Dave Booth. There are workarounds. Here's another method that I've found to be very useful:

-Create a 'Table' in any drawing that extends across the bottom of the format--left to right. The 'Table' origin should be positioned very closely to the 0x,0y drawing origin.

-Within the different cells of the 'Table', enter sample text strings and assign the user-defined 'Font/Text Styles' of your choice to each sample text string.

-Save the 'Table' to disk. This will generate a .tbl file.

-Then just create a 'Mapkey' that loads(retrieves) this 'Table' file into your new drawings and locates it with respect to the 0x,0y drawing origin. You can then modify any existing text string's 'Font/Text Style' to match one of the ones in the 'Table' by using the functionality for copying an *existing* 'Font/Text Style' in your drawing.
TIP: This one is worth creating a 'Mapkey' button for--and placing it on your toolbar.

When you're finished with the drawing, you can always just 'Delete' the unwanted 'Table'. It's only loaded with the 'Mapkey' to serve as a temporary 'Font/Text Style' palette.

If you any questions regarding this technique, just let me know.

Ron Marion

Booth wrote:
Create a new drawing and leave it blank. Create your style library for
that
drawing. Save the blank drawing as "start_drawing(etc...).drw". Every
time
you want to make a new drawing, start by opening this
"start_drawing.drw".
Your library will be safe and sound here. Use Save As when you are done
your
drawing. Even if you accidently save over this start drawing, Pro/e
saves
incrementally so you can find the original.

There are config.pro and sketcher preferences (under andvanced on your sketcher menu I think) to help you with dimensions.

Then call RAND and tell them that they are full of shit.

Dave
problem ,
4
> text styles different fonts and styling and sizing in the format.
>
> When I create a drawing using this format the style library in the
format
> does not come in to the new drawing. If I want to use different text styles
> in my drawing my Rand tech supprot tells me I have to recreate the
text
> styles in every drawing.
>
> This seems to take a lot of the common sense out of using text styles
to
> maintain consistent looking drawings- ie set them up once and just
> subsequently use them in whatever drawing you need as in ACAD, MICROSTATION
> etc.
>
> Am I missing something??????
>
> Also can these text styles be used on dimensions??????
>
>
>
>
 
Me again,

I done some playing around with the drawing templates
and you can achieve what I asked quite easily.

Create a new drawing. Applications>template.
When you insert your format:- Sheet > Format > Add/Replace the format comes in with the parameters in base format, ie &description etc. Set up your text styles and save the drawing file, ie A1_part_drawing.

When creating a new drawing don't use a format use a template and pick the A1_part_drawing. Hey presto all items set up in the template ie. line styles text styles etc are there to be used. You can also set up views but you would want to be very disiplined about which way you start modelling parts in part mode.

It was the methods suggested that promted me to think of this as a solution.

Thanks.

I,m going to ring RAND on monday and tell them they are full of shit.

"Ron Marion" wrote:

I agree with Dave Booth. There are workarounds. Here's another method that I've found to be very useful:

-Create a 'Table' in any drawing that extends across the bottom of the format--left to right. The 'Table' origin should be positioned very closely to the 0x,0y drawing origin.

-Within the different cells of the 'Table', enter sample text strings and assign the user-defined 'Font/Text Styles' of your choice to each sample text string.

-Save the 'Table' to disk. This will generate a .tbl file.
...
 
Excellent mojo. I've only used to 'templates' to set up standard views, etc. But you are right. The 'start model' process would have to be more disciplined for that type of thing. I totally agree with you. But for setting up other standards, such as what you are interested in, they are very nice. Sounds like you have about three different options available to you now. That's quite a bit better than what you were originally told by your first line of support.

At any rate, glad things worked out for you.

Ron Marion

mojo wrote:
Me again,

I done some playing around with the drawing templates
and you can achieve what I asked quite easily.

Create a new drawing. Applications>template.
When you insert your format:- Sheet > Format > Add/Replace the format comes in with the parameters in base format, ie &description
etc.
Set up your text styles and save the drawing file, ie A1_part_drawing.

When creating a new drawing don't use a format use a template and pick the A1_part_drawing. Hey presto all items set up in the template ie.
line
styles
text styles etc are there to be used. You can also set up views but you would want to be very disiplined about which way you start modelling parts in part mode.

It was the methods suggested that promted me to think of this as a
solution.
Thanks.

I,m going to ring RAND on monday and tell them they are full of shit.

"Ron Marion" wrote:

> I agree with Dave Booth. There are workarounds. Here's another method
> that I've found to be very useful:
>
> -Create a 'Table' in any drawing that extends across the bottom of
the
> format--left to right. The 'Table' origin should be positioned very
> closely to the 0x,0y drawing origin.
>
> -Within the different cells of the 'Table', enter sample text strings
> and assign the user-defined 'Font/Text Styles' of your choice to each
> sample text string.
>
> -Save the 'Table' to disk. This will generate a .tbl file.
>
> -Then just create a 'Mapkey' that loads(retrieves) this 'Table' file
> into your new drawings and locates it with respect to the 0x,0y
drawing
> origin. You can then modify any existing text string's 'Font/Text
> Style' to match one of the ones in the 'Table' by using the
> functionality for copying an *existing* 'Font/Text Style' in your
> drawing.
> TIP: This one is worth creating a 'Mapkey' button for--and placing it
on
> your toolbar.
>
> When you're finished with the drawing, you can always just 'Delete'
the
> unwanted 'Table'. It's only loaded with the 'Mapkey' to serve as a
> temporary 'Font/Text Style' palette.
>
> If you any questions regarding this technique, just let me know.
>
> Ron Marion
>
> Booth wrote:
> >Create a new drawing and leave it blank. Create your style library
for
> that
> >drawing. Save the blank drawing as "start_drawing(etc...).drw".
Every
> time
> >you want to make a new drawing, start by opening this
> "start_drawing.drw".
> >Your library will be safe and sound here. Use Save As when you are
done
> your
> >drawing. Even if you accidently save over this start drawing, Pro/e
> saves
> >incrementally so you can find the original.
> >
> >There are config.pro and sketcher preferences (under andvanced on
your
> >sketcher menu I think) to help you with dimensions.
> >
> >Then call RAND and tell them that they are full of shit.
> >
> >Dave
> >--
> >
> >mojo wrote:
> >
> >> Hi there, hope someone can set me straight.
> >>
> >> I want to create different text styles in a drawing format - no ...
text
> >styles
> >> in my drawing my Rand tech supprot tells me I have to recreate the
> text
> >> styles in every drawing.
> >>
> >> This seems to take a lot of the common sense out of using text
styles
> to
> >> maintain consistent looking drawings- ie set them up once and just
> >> subsequently use them in whatever drawing you need as in ACAD,
> >MICROSTATION
> >> etc.
> >>
> >> Am I missing something??????
> >>
> >> Also can these text styles be used on dimensions??????
> >>
> >>
> >>
...
 
Thanks lads

Stephen - (Mojo)

"Ron Marion" wrote:

Excellent mojo. I've only used to 'templates' to set up standard views, etc. But you are right. The 'start model' process would have to be more disciplined for that type of thing. I totally agree with you. But for setting up other standards, such as what you are interested in, they are very nice. Sounds like you have about three different options available to you now. That's quite a bit better than what you were originally told by your first line of support.

At any rate, glad things worked out for you.

Ron Marion

...
 
Status
Not open for further replies.

Latest threads

Back
Top