Font of Microstation to Truetype

Status
Not open for further replies.

Christian Borg

Usenet Archive
Joined
Jan 17, 2002
Messages
1
Reaction score
0
I would like to convert a font from microstation to Adobe Truetype. Some idea or utility?
Thanks in advance
 
If you are using v7 ustn go to menu Utilities>install fonts

You will see a dialog box with fonts you want to import on the left. Select the open btn. Under Type: You can select different sorts of files to import Select Truetype(*.tt) and then browse to the c:\windows\fonts\ directory, or to where your tt font file is. On the right select the font file you want to put it into. Either select your existing font file or make a new one. You will find these in your ...bentley\workspace\system\symb directory or ...bentley\workspace\standards\symb directory.

Then it is just a case of copying the file over by selecting it on the left side and then selecting >>copy>> btn.

You should be able to work out the rest.

Note: When making up your own font file make sure that the font you want as your 'default' font file is the FIRST file you copy over. It is automatically assigned as your deafault font.

Hope this is what you were looking for.

Damon

"Christian Borg" wrote:

I would like to convert a font from microstation to Adobe Truetype. Some idea or utility?
Thanks in advance
 
If only it was that simple.

What I did was:

1. export the individual fonts to cell libraries.
2. each cell into its own design file (used cell2dgn)
3. used a batch to convert each design file to a dwg
4. imported the dwg to Illustrator and saved each as an eps file
5. imported the eps file into fontographer
6. generated the ttf

Points to note
the eps file can't be generated from microstation I found the only file that would import OK was one generated in Illustrator.

stick figures or single lines do not work as expected.

text (as text) didn't work

some manipulation of the working units may provided a better result

good luck
ian

Christian Borg wrote:
I would like to convert a font from microstation to Adobe Truetype. Some idea or utility?
Thanks in advance
 
Status
Not open for further replies.

Latest threads

Back
Top