FAO The Sporkman

Discussion in 'SolidWorks' started by jjs, Apr 22, 2004.

  1. jjs

    jjs Guest

    Mark


    Did you ever get the SW site to work with IE6 ?


    If so - How;-)


    Regards



    Jonathan Stedman
     
    jjs, Apr 22, 2004
    #1
  2. jjs

    Mike J. Wilson Guest

    Could it have something to do with Flash or Java not being
    installed?

    Mike Wilson
     
    Mike J. Wilson, Apr 22, 2004
    #2
  3. jjs

    Sporkman Guest

    Just now I tested out something that had been given me for similar
    problems I had with a different site . . . and it SEEMS to work for the
    SolidWorks site as well.

    1) On the Tools drop-down box, choose "Internet Options."
    2) In the Internet Options window, choose the "Privacy" tab.
    3) Near the bottom of the Privacy window area, click the "Edit" button.
    4) Look in the scroll list to see if "solidworks.com" is listed. If it
    is, delete it.
    5) Under "Address of Web site," enter www.solidworks.com and then click
    the "Allow" button.

    Hope that works for you.

    Best regards,
    'Sporky'
     
    Sporkman, Apr 22, 2004
    #3
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. FAO: Mr Fleming (ADO-AttDB)

  2. defining a block in a lisp and check if the block is already defined in the drawing

  3. How to estimate the size of the chip from the netlist?

  4. What does this message "The geometry which serves as the origin of the detailed view "A", on sheet X

  5. Sporkman - RTP User Group?

  6. Making the 2nd plate match the hole locations of the 1st plate

  7. is there ways to move the paper instead of the drawing in the layout format?

Loading...