EDG USTv7 - center1-2 of truncated cone

Hi all,

How to get center1 and center2 from edg(display dump) of truncated
cone??

Complement:

Im checking some weld problems in a PDS 3d Microstation plant.

Using EDG i have a problem to get the center1 and 2 of a truncated
cone.

exampleedg output)
Element # 44, Block = 42, Word = 23, byte = 21036
1 1719 004d 8000 0370 7fff f1e5 7ffe b5a5
9 8000 41f0 8000 159b 7ffe d95b 0000 002b
17 0a00 0410 0001 4000 0000 c000 0000 4000
25 0000 4000 0000 455c 0000 0000 0000 4570
33 0000 0000 0000 c89c 4000 0000 0000 468e
41 d800 0000 0000 4783 e000 0000 0000 4570
49 0000 0000 0000 c89c 4000 0000 0000 468e
57 d800 0000 0000 0000 0005 000d 05d:8 1207
65 0401 0000 0000 0000 0000 0000 0000 8000
73 0001 000e 05d8 8000 0001 000e 05d8

28-44 positions has center1 (x,y,z) and radius information (end of
edghelp.txt)
inside Microstation this element has center1 x=11 y=12 z=-1000 e
center2 x=211 y=12 z=-1000

but the hexa sows me : ( i put 5,6, 7 columns with x(mm), dexa to
decimal, diference between this sequence.
455c 0000 0000 0000 11 17756 20
4570 0000 0000 0000 12 17776 20

some other values:

(hexa) (mm) (dec) (dif)
0000 0000 0000 0000 0
43a0 0000 0000 0000 1 17312 128
4420 0000 0000 0000 2 17440 80
4470 0000 0000 0000 3 17520 48
44a0 0000 0000 0000 4 17568 40
44c8 0000 0000 0000 5 17608 40
44f0 0000 0000 0000 6 17648 28
450c 0000 0000 0000 7 17676 20
4520 0000 0000 0000 8 17696 20
4534 0000 0000 0000 9 17716 20
4548 0000 0000 0000 10 17736 20
455c 0000 0000 0000 11 17756 20
4570 0000 0000 0000 12 17776 20
4582 0000 0000 0000 13 17794 18
458c 0000 0000 0000 14 17804 10
4596 0000 0000 0000 15 17814 10
45a0 0000 0000 0000 16 17824 10
45aa 0000 0000 0000 17 17834 10
45b4 0000 0000 0000 18 17844 10
45be 0000 0000 0000 19 17854 10
45c8 0000 0000 0000 20 17864 10

Thanks in advance for help.

Heron Banach
Engineering IT