Josh Koffman
Usenet Archive
- Joined
- Dec 3, 2001
- Messages
- 2
- Reaction score
- 0
Hi all. I'm running AutoCAD 2000, with a Summasketch II+, and dual monitors. I'm having a problem that's really really annoying, and now it's preventing me from actually tracing an image. I think the problem stems from the fact that I run my monitors at two different resolutions. I can't help this, I'm running on a laptop, and I can't run the laptop panel at higher than 800x600. I run my external monitor at 1024x768. I run AutoCAD on the monitor, so I get a greater area to work in.
My problem is that when I use my tablet, something is wrong. I have the overlay, and I can configure the tablet, and all my menu areas work fine. I can access all the functions work great. The problem is that the screen portion of my tablet (the little square are in the middle) isn't functioning as it should. It works...kinda. What's happening is that it doesn't seem to access the entire real screen area. I can move all the wav across the little square on the tablet, but the cursor doesn't move the entire way across the real screen. The same thing happens vertically as well. I think this is happening because my screens are at different resolutions.
Now, when I go to calibrate the tablet so I can digitize a drawing, I'm having problems as well. It seems as though AutoCAD is mapping the digitized points and the drawing into the little screen area printed on the overlay. I thought the whole point of tablet mode was that I could use the whole tablet to digitize a drawing. It's not a huge drawing - just 8.5x11", and the tablet is 12x12". Anyway, even using just the little area would be ok...if it worked. Again, I can't seem to use the whole screen. This is really frustrating...has anyone else heard of this? GTCOCalcomp (the people who own the Summagraphics line now) haven't heard of this problem. I don't know what to do. I really want to use my tablet, but I find myself using my mouse half the time, just because I can't access the whole screen with the tablet.
I would really really appreciate any help or pointers to help...
Thanks in advance,
Josh
My problem is that when I use my tablet, something is wrong. I have the overlay, and I can configure the tablet, and all my menu areas work fine. I can access all the functions work great. The problem is that the screen portion of my tablet (the little square are in the middle) isn't functioning as it should. It works...kinda. What's happening is that it doesn't seem to access the entire real screen area. I can move all the wav across the little square on the tablet, but the cursor doesn't move the entire way across the real screen. The same thing happens vertically as well. I think this is happening because my screens are at different resolutions.
Now, when I go to calibrate the tablet so I can digitize a drawing, I'm having problems as well. It seems as though AutoCAD is mapping the digitized points and the drawing into the little screen area printed on the overlay. I thought the whole point of tablet mode was that I could use the whole tablet to digitize a drawing. It's not a huge drawing - just 8.5x11", and the tablet is 12x12". Anyway, even using just the little area would be ok...if it worked. Again, I can't seem to use the whole screen. This is really frustrating...has anyone else heard of this? GTCOCalcomp (the people who own the Summagraphics line now) haven't heard of this problem. I don't know what to do. I really want to use my tablet, but I find myself using my mouse half the time, just because I can't access the whole screen with the tablet.
I would really really appreciate any help or pointers to help...
Thanks in advance,
Josh