drawing at origin

Discussion in 'AutoCAD' started by bfairey, Mar 1, 2009.

  1. bfairey

    bfairey Guest

    Usually I design in the middle of the screen? and sometimes I need a
    DXF file of a particular feature
    for CNC programming. When I process this DXF file in my CNC program I
    get a leader from the origin
    that is loooong. Even when I move the feature in the original drawing
    to the origin 0,0,0 the DXF to CNC still gives me the long leader.
    Any ideas please.
    Brian.
     
    bfairey, Mar 1, 2009
    #1
  2. bfairey

    BruceF Guest

    I personally don't use DIM's (have no need for them and I'm not all that
    familiar with them)... but could there be some kind of DIM Variable
    (SetVar) that needs to be adjusted?

    Can you save the DXF to an older AutoCAD version (like version 12) and
    see if that solves it?

    For what it's worth...

    BruceF
     
    BruceF, Mar 1, 2009
    #2
  3. If the Copy/Paste doesn't help try a WBLOCK of the portion or drawing.
     
    cshadedesign.com, Mar 2, 2009
    #3
  4. Look at your INSBASE variable - it needs to also be at 0,0,0


    _____________________________

    Patrick Hughes - Engineered Design Solutions

    CadTempo: Time Logging for CAD
    visit http://www.Cadtempo.com
    _____________________________
     
    Patrick Hughes, Mar 2, 2009
    #4
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.