Draw Line Perpendicular Bug

Discussion in 'AutoSketch' started by Jimhu, Nov 30, 2004.

  1. Jimhu

    Jimhu Guest

    - If you try to use Draw Line Perpendicular while you are in the multi-snap mode with "Tangent" snap active you get an error message. To clear the message move your curser to the tool bar area and hit your spacebar. Then Cnrtl "Q" and deactivate "Tangent" or turn off the Multi Snap and select "Tangent" as your current snap.
     
    Jimhu, Nov 30, 2004
    #1
  2. Jimhu

    Jürgen Palme Guest

    Which Version do you use? I can't repeat this error neither in Version 8 nor
    in version 9.

    Juergen



    multi-snap mode with "Tangent" snap active you get an error message. To
    clear the message move your curser to the tool bar area and hit your
    spacebar. Then Cnrtl "Q" and deactivate "Tangent" or turn off the Multi
    Snap and select "Tangent" as your current snap.
     
    Jürgen Palme, Nov 30, 2004
    #2
  3. Jimhu

    Jimhu Guest

    We use version 9 and have tried this with a couple different Serial # installations
     
    Jimhu, Dec 4, 2004
    #3
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. draw a perpendicular from a point on the nearest segment of a polyline

  2. Perpendicular to a wavy line

  3. perpendicular from wavey line

  4. draw line to middle of 2 picked lines then offset that line help...

  5. Draw cut line length and angle

  6. Can't draw an angled line - Why?

  7. Draw Perpendicular Lines - Code help requested

  8. Perpendicular snap from line

Loading...