Display signals in hex format in Spectre

Discussion in 'Cadence' started by Kumar Yelamarthi, Aug 18, 2004.

  1. Kumar Yelamarthi

    Kumar Yelamarthi Guest

    Hello Everyone,

    I am creating a design with 64 inputs and 64 outputs. While simulating
    the design using Spectre, is there any procedure I could follow to
    display the 64 bit output in hex format rather than displaying the
    just voltage swing of each signal independently.
    I searched the previous docs and was not able to find anything on
    this.

    Please help him in this issue.

    Thank you,
    Kumar
     
    Kumar Yelamarthi, Aug 18, 2004
    #1
  2. Kumar Yelamarthi

    A. B. Guest

    If you mean by displaying, seeing them in a waveform viewer,
    independently of spectre, you can look into the menus and there
    should be there something like create a bus. After creating
    the bus you can change its radix to hex for example.
    HTH.
     
    A. B., Aug 18, 2004
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Convert hex to decimal and vice versa

  2. How to make the output of spectre as text format in a file

  3. What is "Text Display"? Text Display vs. Label

  4. spectre netlist format

  5. convert from pro\E format in *.obj format

  6. Hex Panel Nuts

  7. Looking for Heavy hex BOLT drawing

  8. Autosketch 5.0 Not opening a .SKF file format, error "unexpected file format"

Loading...