Differences Between Wildfire 2.0 and 3.0

Discussion in 'Pro/Engineer & Creo Elements/Pro' started by Andy, Nov 12, 2010.

  1. Andy

    Andy Guest

    Hi Everyone

    We are moving from Wildfire 2.0 to 3.0 (yes I know, I know... and I
    don't have a choice versus 4.0 or 5.0). I need a list of the
    differences between these 2 versions. Can anyone provide a list of
    the major or minor differences so that I can share this with my
    designers?

    Thanks,
    Andy
     
    Andy, Nov 12, 2010
    #1
  2. Andy

    Lehnsherr Guest

    Hi, Andy:

    If you have access to CADTRAIN COACH, they have a 'differences' page
    on their WF3 page:
    http://mcae.cca.cpqcorp.net/coachWF3/index.html

    The link is at the bottom of the left-hand menu.

    If you don't have COACH, I highly recommend it.

    Lehnsherr
     
    Lehnsherr, Nov 15, 2010
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Compare two drawings and find differences

  2. HSpice and Spectre Model differences

  3. differences between MS/J and V8

  4. Differences between UG and Pro/E

  5. Differences between datecodes

  6. Differences Between Locked and Inlocked Versions

  7. Differences between 2000 and 2002????

  8. Differences between DXF R14 and R2000

Loading...