Detailing question

Status
Not open for further replies.

Jason Fugate

Usenet Archive
Joined
Jul 18, 2001
Messages
14
Reaction score
0
EJ wrote:

I am detailing a large assembly of tubes and have to place a dimension across the tubes, no other options. Problem is, when I do so the lines from the tubes make the dimension unreadable. Is there a way to cut / remove a window like area of the model around the dimension text so it can be easily read? If I use the erase command I lose the whole tube, which is unacceptable.

Thanks

Two options come to mind--a preferred choice would be to create a flat surface feature at the proper location to "hide" the model where the dimension is located--this can be blanked in other views or created so it is not visible based on the orientation....

Second would be to use Modify View > Snapshot and then trim the resulting draft entities (I would not do this as it breks the parametric nature of the selected view and any revisions would have to be done manually or the process repeated.)

Other thoughts would be to create another view so there is room to dimension, etc....it generally bad practice to have dimensions on a view but I know it is done.

Good Luck!

Jason D. Fugate
Sr Consultant/Trainer
 
I would say...

Redifine the View to a partial view and creat a boundary that suites your design .
 
Status
Not open for further replies.

Latest threads

Back
Top